Pump 12V mod. ProActive ® Abyss 300 ® in PVC with head 92 m diameter 4″.
It starts simply by connecting it to a 12V battery (requires Low flow with Power Booster 4)
It is ideal for sampling water inside wells and piezometers, even with low-flow method (low-flow) thanks to the regulator (requires Low flow with Power Booster 4), with which you can limit the flow up to 40 ml/min. It can also be further reduced to 10 ml/min using the low-flow sampling control valve.
Thanks to its low consumption, it is also an excellent solution for remediation and treatment systems. In fact, it is able to work continuously 24 hours a day, 7 days a week.
It can operate in harsh conditions and high turbidity.
It works without the need for cooling and can operate continuously 24 hours a day.
The motor has a life expectancy of approximately 3,000 hours.
It has a smooth, uneven design to prevent possible jamming inside the well.
Thanks to its low consumption, it can be powered by a solar panel.
It comes with a 95 m power cable and a connection for a flow regulator.
Flow rate from 7.5 to 2 l/min
Peak consumption 75W/5 Amp
Accepts hoses with a diameter of 10-12 mm
Also available in Slimline version with a diameter of 3.73″
Smart Geo srl is the sole distributor in Italy of ProActive ® products
Disclaimer: ProActive® products are intended for use in water only.
They must not be modified in any way and must be used only with original ProActive® accessories (flow regulators, etc.). They must not be used with or near fuels, flammable liquids, vapors, and, but not limited to, ethylene oxide, methyl chloride, pentane, gasoline, diesel fuel, benzene, acetone, ethyl alcohol, isopropyl alcohol, etc.
Any unauthorized use or modification may damage the product or cause injury to persons or property and is the sole risk and responsibility of the purchaser and end user, and voids any warranty.
Proactive Environmental Products International®
